HP0722N
HP0722N is Low Density Polyethylene grade suitable for producing medium duty films and contains no slip and antiblock additives. It gives good toughness and optical properties in the film.
HP2022J
HP2022 series resins are Low Density Polyethylene grades suitable for general purpose packaging. They exhibit better draw down, good opticals and mechanical properties.
HP2023J
SABIC® HP2023 series resins are Low Density Polyethylene grades suitable for general-purpose packaging. They exhibit better draw down, good optical and mechanical properties.
HP4023W
HP4023W is Low Density Polyethylene grade suitable for producing general-purpose films and contains slip and antiblock additives. It gives excellent processability and optical properties with good mechanical properties.
M200024
LLDPE M200024 is a linear low density polyethylene copolymer injection moulding grade with a narrow molecular weight distribution. It has been typically designed to have good low temperature toughness, stress crack resistance (ESCR) and gloss.
M200056
M200056 is a High Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good flow properties, low warp age with good dimensional stability and high gloss.
M500026
M500026 is Linear Low Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give excellent flow properties with better low temperature toughness, stress crack resistance and gloss.
M80064
HDPE M80064 is a high density polyethylene injection moulding grade with a narrow molecular weight distribution. It is intended for use in injection moulding applications where rigidity, toughness and warp resistance are required. HDPE M80064 is available with UV stabilizer as HDPE M80064S.
M8060
M8060 is a high density polyethylene resin used for injection molding. It has good flow characteristics that make it easier to process. Injection molding parts made from this resin exhibit high modulus and low webpage.
MDPE
Medium-density polyethylene (MDPE) is a type of polyethylene defined by a density range of 0.926–0.940 g/cm3. It is less dense than HDPE, which is more common. … MDPE is typically used in gas pipes and fittings, sacks, shrink film, packaging film, carrier bags, and screw closures.
mLLDPE
Metallocene Linear Low Density Polyethylene (mLLDPE) refers to tougher LLDPE type polymer with a density between about 0.915 and 0.940 g/cm3, made using metallocene catalysts. Medium Density Polyethylene (MDPE) refers to polymer with a density between 0.930 and 0.940 g/cm3.
NPP Black
NPP Black is a High Density Polyethylene, black colored resin. It has high melt viscosity, it is an appropriate resin for extrusion of non pressure pipes.
OFF SPEC MFI 2
Sepchem 2 MFI is designed to offer a good balance of optical and mechanical properties.
P6006
P6006 is black compound high density (class MRS 10 – PE 100) Polyethylene with bimodal distribution of molecular mass. It is specifically designed for pressure Pipe applications. It provides excellent stress crack resistance properties (ESCR) combined with very good long term hydrostatic strength.